Settings Reset - AJAX Hub 2 Plus User Manual

Hub 2 Plus User manual | Ajax Systems Support

Settings reset

Resetting the hub to the factory settings:
1. Turn on the hub if it is off.
2. Remove all users and installers from the hub.
3. Hold the power button for 30 s — the Ajax logo on the hub will start blinking red.
4. Remove the hub from your account.
Resetting the hub does not delete connected users.
Events and alarms noti=cations
The Ajax security system informs the user about alarms and events in three ways: push
notiDcations, SMS, and phone calls. The notiDcation settings can be changed only for registered
users.
Hub 2 Plus does not support calls and SMS transmission using VoLTE (Voice over LTE) technology. Before
buying a SIM card, please make sure that it only supports the GSM standard.
Types of events
Malfunctions
https://support.ajax.systems/en/manuals/hub-2-plus/?_ga=2.241650955.824691895.1674290377-1071851791.1672842436
Purpose
Loss of connection between the
device and the hub
Jamming
Low battery charge in device or
hub
Masking
Tampering alarm
Types of noti^cations
Push notiDcations
SMS
21/1/23, 2:06 µµ
Ʃελίδα 15 από 23