AJAX Hub 2 Plus User Manual page 11

Hub 2 Plus User manual | Ajax Systems Support
Monitoring Station
Hub model
Hardware version
Firmware
ID
Rooms
Prior to linking a detector or device to a hub, create at least one room. Rooms are used to group
detectors and devices, as well as to increase the information content of notiDcations. The name
of the device and room will be displayed in the text of the event or alarm of the security system.
https://support.ajax.systems/en/manuals/hub-2-plus/?_ga=2.241650955.824691895.1674290377-1071851791.1672842436
Connected — the hub is directly connected to the
central monitoring station of the security organization
Disconnected — the hub is not directly connected to
the central monitoring station of the security
organization
If this Deld is displayed, the security company uses a
direct connection to receive events and security system
alarms
What is a direct connection?
Hub model name
Hardware version. Unable to update
Firmware version. Can be updated remotely
ID/serial number. Also located on the device box, on the
device circuit board, and on the QR code under the
SmartBracket panel
21/1/23, 2:06 µµ
Ʃελίδα 11 από 23