AJAX Hub 2 Plus User Manual page 13

Hub 2 Plus User manual | Ajax Systems Support
1. Open the room and select Add device.
2. Name the device, scan its QR code (or enter it manually), select a group (if group mode is enabled).
3. Click Add – the countdown for adding a device will begin.
4. Follow the instructions in the app to connect the device.
Please note that in order to link to the hub, the device must be located within the hub's radio
communication range (at the same protected object).
Hub settings
Settings can be changed in the
1. Go to the Devices tab
2. Select Hub 2 Plus from the list.
3. Go to Settings by clicking on the icon
Note that after changing the settings, you should click the Back button to save them.
Avatar
Hub name
Users
Ethernet
Wi-Fi
https://support.ajax.systems/en/manuals/hub-2-plus/?_ga=2.241650955.824691895.1674290377-1071851791.1672842436
Ajax app :
.
.
21/1/23, 2:06 µµ
Ʃελίδα 13 από 23