Dtha2 Anemometer; Wpcp Temperature Pipe Clamp Probe - Kane -EGA4 Manual

KANE
16
AND DATA TRANSFER
You can connect optional wireless KANE LINK devices to your analyser.
Navigate to MANAGE LINK DEVICES in SETUP MENU - see page 20.
To ADD, REMOVE and check STATUS of optional KANE LINK device select
LINK using &
To wirelessly transfer data to a connected smart device running our KANE
LIVE App, select App using

DTHA2 ANEMOMETER

16.1
To add your DTHA2 anemometer select DTHA2 using
Enter serial number using
be 10 digits long.
If shorter enter 0's to make up to 10, eg enter serial number below as
0002001228.

WPCP TEMPERATURE PIPE CLAMP PROBE

16.2
To add a temperature probe clamp probe, select WPCP then enter serial
number using
Enter serial number using
long.
If longer use last 10 digits, e.g: enter serial number below using last 10 digits:
2105094301
Other KANE LINK devices can be paired - Contact KANE for more details
34 KANE-EGA4/5 MANUAL
LINK WIRELESS MEASUREMENT
buttons.
&
&
&
buttons - Each serial number must
- Each serial number must be 10 digits
&