Kane-Dtha2 Anemometer; Kane-Wpcp Temperature Pipe Clamp Probe - Kane EGA-4 Manual

KANE
16
& DATA TRANSFER
You can connect optional wireless KANE LINK devices to your analyser.
Navigate to MANAGE LINK DEVICES in SETUP MENU - see page 20.
To ADD, REMOVE & check STATUS of optional KANE LINK device select
LINK using
To wirelessly transfer data to a connected smart device running our KANE
LIVE App, select App using

KANE-DTHA2 ANEMOMETER

16.1
To add your KANE-DTHA2 anemometer select DTHA2 using
Enter serial number using
be 10 digits long.
If shorter enter 0's to make up to 10, eg enter serial number below as
0002001228.

KANE-WPCP TEMPERATURE PIPE CLAMP PROBE

16.2
To add a temperature probe clamp probe, select WPCP then enter serial
number using
Enter serial number using
long.
If longer use last 10 digits, e.g: enter serial number below using last 10 digits:
2105094301
Other KANE LINK devices can be paired - Contact KANE for more details
34 KANE-EGA4/5 MANUAL
LINK WIRELESS MEASUREMENT
& buttons.
&
&
&
buttons - Each serial number must
- Each serial number must be 10 digits
&