Maintenance And Repair - KERN CH Operating Instructions Manual

Electronic suspended balance
Hide thumbs Also See for CH:
Table of Contents

Advertisement

Cleaning, maintenance and servicing
10.2

Maintenance and repair

Maintenance and servicing may only be carried out by trained specialized
staff.
A faulty maintenance may cause the load carrier to break down and
falling load
Falling load may cause severe injury or death
 Have serviced the balance at regular intervals by trained
specialized staff with competent knowledge of working with
suspended balances.
 Consider the maintenance work as per chapter „Maintenance
Table"
 Consider the national accident prevention regulations and all
operator health and safety at work and operating regulations.
 If safety shortcomings and discrepancies with the checklists occur,
shutdown the balance immediately.
 Have the parts exchanged only by trained specialized staff.
Do not repair the balance by yourself.
• Carry out maintenance work as per chapter „Maintenance Table".
• Maintenance work is restricted to specialist staff possessing competent
knowledge of working with suspended balances. Thereby the national
regulations for prevention of accidents as well as the working, operation and
safety regulations of the owner-operator.
• To check the dimensions only use suitable test devices / feeler gauges.
• The results of the regular maintenance must be entered in the list „Checklist
„Regular maintenance"".
• Clean the load carriers before test procedure.
• Replaced parts must be entered in the list „Spare parts and repairs".
10.2.1 Monitoring of Test Resources
Within the scope of quality assurance the metrological properties of the balance and
of an existing test weight must be checked at regular intervals. The responsible user
must define a suitable interval as well as type and scope of this test. Information
regarding the test equipment monitoring of balances as well as the test weights
required for this is available on the KERN homepage (www.kern-sohn.com). In
KERN's accredited DKD calibration laboratory test weights and balances may be
calibrated (return to the national standard) fast and at moderate cost.
38 | en
INFORMATION
⚠ WARNING
CH-BA-e-2440

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ch 15k20Ch 50k50Ch 50k100

Table of Contents