Hold Weighing Value (Data-Hold Function); Peak Value Function (Peak Function) - KERN HFA Series Operating Manual

5.8

Hold weighing value (Data-HOLD function)

Once a stable weight value has been established, this can be fixed until deleted
before the next weighing activity.

Attach the material to be weighed

To start the Hold function, press
activity will be displayed.
The indicator  above HOLD appears.

The weighing value will be held in the display until it is deleted by
5.9

Peak value function (peak function)

Attention:
Never exceed the maximum permitted load of the peak value on the
balance (!!Danger of breaking!!).

To start the peak value function, press and hold

Lift load and the heaviest load of the weighing activity will be displayed.
The indicator  above PEAK will appear.

The peak load will be held on the display until deleted by pressing
for about 2-3 seconds. The  above PEAK disappears.
press
HFA-BA-e-1612
and the heaviest load of the last weighing
during zero display.
.
. For that,
29