Accessories / Spare Parts - Kärcher KM 85/50 W Bp Instruction Manual

Replacing / setting the sealing strips
Sealing strips Setting values
Side sealing strips Distance from ground 1 - -2 mm
Front sealing strip Trailing distance 10-15 mm
Rear sealing strip Trailing distance 5-10 mm
Note
The trailing distance of the front and rear sealing strip defines
how much the sealing lip folds backwards when driving the de-
vice forwards.
When set correctly, there must be a gap between the side sealing
strips and the floor.
Fastening
1
Side sealing strip
2
Front sealing strip
3
Rear sealing strip
4
1. Unfasten the fastening of the sealing strips.
2. Set the sealing strip by shifting it in the elongated holes.
a Refer to the table for the values.
3. Once the settings are correct, fasten the sealing strips.
Check the fuses
Main fuse
1
Fuse
2
1. Open the cover.
2. Replace the defective fuse only with a fuse of the same fuse
rating.
3. The device is ready for use when the main breaker is
down.
4. If the main breaker is up, the breaker has triggered
and the device is not ready for operation. Press the
breaker.
If the main breaker triggers repeatedly, the cause must
be checked. In this case contact Customer Service.
Fuses

Accessories / spare parts

The following is an overview (excerpts thereof) of wear parts or
optionally available accessories.
Accessories
Side brush, stand-
ard
Side brush, soft
Side brush, hard
Roller brush,
standard
Roller brush, soft For fine dust, on indoor and
Roller brush, hard For removal of stubborn dirt,
Dust filter
Sealing strip, side
Left and right
Sealing strip, rear
Sealing strip, front
Side brush attach-
ment kit, left
Home Base ac-
cessories
Adapter
Double hook
Detergent contain-
er
Coarse dirt pliers
set
English
Description
For indoor and outdoor surfac-
es
For fine dust, on indoor and
outdoor surfaces
Moisture resistant
For removal of stubborn dirt,
for outdoor use
Moisture resistant
For indoor and outdoor surfac-
es
Wear and moisture resistant
outdoor surfaces
Moisture resistant
for outdoor use
Moisture resistant
Replace the flat filter at least
1x annually
Moisture resistant, washable
Has to be installed by Custom-
er Service
Description
For securing to Home Base rail
(device)
Can only be used in conjunc-
tion with adapter
Can only be used in conjunc-
tion with adapter
Coarse dirt pliers including at-
tachment to the device
Order no.
6.906-132.0
6.905-626.0
6.905-625.0
4.762-430.0
4.762-442.0
4.762-443.0
5.731-585.0
5.400-723.0
5.394-834.0
5.394-832.0
2.850-266.0
Order no.
5.035-488.0
6.980-077.0
4.070-006.0
4.035-524.0
27