INTEGRATING THE VPS WITH THE PANASONIC KX-T DIGITAL PBX
4.2 KX-TD500 PROGRAMMING FOR DIGITAL
INTEGRATION
A maximum of 2 VPS cards for the VPS can be installed at the KX-TD500. Follow the
procedure below to program the VPS card(s) for DPT Integration.
Note:
The following procedure is for when connecting the KX-TVS300; please refer to it when
connecting the KX-TVS110 or KX-TVS200.
1.
Assignment of the VPS card to be connected to the VPS
Note:
If the VPS card to which the VPS will be assigned is already installed in the KX-
TD500, skip the steps a through d. If a new VPS card is installed in the KX-TD500,
follow the steps below.
a)
Go to the "1-1 Slot Assignment" screen.
b)
Assign the slot "Card Type" to be installed to "DLC" or "DHLC" card.
c)
Click "Apply" to save the card type assignment.
d)
Set "Status" to "INS".
Screen output:
94
Installation Manual