Panasonic KX-TVS300 Installation Manual page 99

Screen output:
5.
To set the trunk (CO line) features, follow the instructions in "Settings for the trunk (CO
line) features" (3.3.3 KX-TD500 Programming for Inband Integration in
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs).
6.
Connect the jack assigned in Step 4 to the VPS.
7.
Connect your laptop computer to the VPS and start your communication software (i.e.,
HyperTerminal, Procomm Plus, Smartcom...).
Communication Parameters: 9600, 8 Bit, None, 1
8.
Turn the power switch off at the VPS and set the DIP/Rotary Switch to position 5.
Only perform this step when initially setting up the system.
CAUTION
Setting the DIP/Rotary Switch to position 5 will default the Voice Processing System,
resulting in a loss of all user programming and voice messages (except User 1 and User 2
prompts).
9.
Turn the power switch back on at the VPS and wait approximately 7-8 min while the
system initializes.
Installation Manual
INTEGRATING THE VPS WITH THE PANASONIC KX-T DIGITAL PBX
99