Table of Contents
Advertisement
SYSTEM MANAGER'S GUIDE
Caller ID Screening
23.
a)
The current setting plays. Press [1] to change the setting (enable or disable).
b)
Confirm the entry is correct and Press [2] to accept it.
Message Notification
24.
a)
The current setting plays. Press [1] to change the setting (enable or disable). If the
Message Notification is enabled, go to Step 24b below.
b)
Press [1], [2], [3], [4], or [5] to choose the desired Beeper Callback Number Entry
Mode.
• [1] Caller Select Mode
• [2] Without message mode
• [3] Before message recording mode
• [4] After message recording mode
• [5] Disable All Entry Mode (Caller cannot access beeper)
c)
Confirm the entry is correct and Press [6] to accept it.
d)
The current setting of MWL Notification for Unreceived Message plays. Press [1]
to change the setting (enable or disable).
e)
Confirm the entry is correct and Press [2] to accept it.
f)
The current setting of Device Notification for Unreceived Message plays. Press [1]
to change the setting (enable or disable).
g)
Confirm the entry is correct and Press [2] to accept it. Return to Step 24a above.
328
Installation Manual
Advertisement
Table of Contents
Troubleshooting
