INSTALLATION
2.7 CONNECTIONS
2.7.1 Connecting to the PBX
One jack of the VPS can be connected to 1 jack of the PBX. Use a 4-conductor cable for
connection with KX-T systems that use DPT Integration. Use a 2-conductor (T and R) cable
for connection to all other PBXs.
4-Conductor Cable
Y
G
R
B
Modular Connection
B: BLACK
R: RED
G: GREEN
Y: YELLOW
RJ-11
2.7.2 Opening the Ferrite Core and Cable Clip
Ferrite Core
Insert your finger into the opening of either one of the two ferrite cores and open it as shown
below:
Notes
The illustration above is for the KX-TVS300 as an example; please refer to it for the KX-
TVS110 and KX-TVS200.
• The KX-TVS110 and KX-TVS200 are equipped with only one ferrite core.
• The ferrite core for the KX-TVS110 and KX-TVS200 has the lock on the right side.
52
Outer Pins
Inner Pins
Terminal wire
L
5
T
4
R
3
H
2
Y
G
R
B
RJ-11
Installation Manual