Panasonic KX-TVS300 Installation Manual page 261

Parameter
Authorization
for Message
Notification
Beeper
Callback
No. Entry
Mode
MWL
Notification for
Unreceived
Message
Device
Notification for
Unreceived
Message
Installation Manual
Table 45
Value Range
(Default)
1. Yes If set to "Yes", the Message Manager is able to utilize the
2. No Message Waiting Notification feature. The sub-parameters
(Yes) to be set include Beeper Callback No. Entry Mode, MWL
Notification for Unreceived Message, and Device
Notification for Unreceived Message. If set to "No", sub-
parameters cannot be assigned.
1. Caller Permits the Message Manager to use the Callback Number
Select Entry feature.
2. Without
3. Before
Caller
4. After
Select:
5. Disable
(Disable)
Without:
Before:
After:
Disable:
Note: To utilize this feature, the callback number entry code
must be included in the subscriber's beeper number. When
"Disable" is selected or if the caller does not enter a callback
number, "System Callback No." (see Table 67) will be
displayed on the beeper's display. If a caller's number is
received through a telephone company's Caller ID service,
the caller's number will be displayed instead of "System
Callback No.".
1. Yes If set to "Yes", the message waiting lamp illuminates when
2. No unplayed messages remain after the Message Manager has
(Yes) accessed the mailbox.
1. Yes If set to "Yes", the VPS calls the appropriate device in
2. No numerical order until all unplayed messages are received.
(No)
SYSTEM ADMINISTRATOR'S GUIDE
Description/Function
After recording a message, the caller is asked
if the message is urgent. If urgent, the caller is
asked to enter the callback number.
Without recording a message, the caller is
asked to enter the callback number.
Before recording a message, the VPS asks the
caller to enter the callback number.
After recording a message, the VPS asks the
caller to enter the callback number.
Disables the Callback Number Entry feature.
261