Advertisement
7.7 GRAV-2
Value of gravity coefficient for the place of use.
Note: If some of the parameters "GRAV-1" or "GRAV-2" is set to zero, no gravity compensation will be
active.
7.8 USEC-Z
If parameter set =1, when turning ON the instrument, the indicator will not initial zeroing and calibration
Zero will be used.
Default setting: 0
7.9 NZTRAC
Activation of the automatic zero-tracking device (see section 4.20) with stable decreasing of the weight
near Zero.
0 – Disabled
1 – Enabled
7.10 PZTRAC
Activation of the automatic zero-tracking with stable decreasing of the weight near Zero.
0 – Disabled
1 – Enabled
7.11
ZTRAC
N
Activation of the automatic zero-tracking device with stable decreasing of the weight near Zero.
0 – Disabled
1 – Enabled
7.12 GRAMS_
0 – Disabled
1 – Enabled
7.13 IFGRAM
Allows instrument to send weight to external devices according to command by external device.
0 – Disabled
1 – Enabled
7.14 NEGDSP
Display of negative weight on the display.
0 – Disabled
1 – Enabled
7.15 NEGUNI
Advertisement
