Controlling Ptz Cameras - RGBlink mini-pro v3 Quick Start Manual

How to Enter PTZ
Press 【M】 Button to enter MENU. Tap 【PTZ】 to enter
the PTZ control interface.
mini-pro supports simultaneous control of up to
four cameras. Tap " -" and " +"
number, press ①②③④ button to select PTZ signal
to preview.
Adjusting Parameters
Adjust focus, position and speed to meet needs.
www.rgblink.com

Controlling PTZ Cameras

to set PTZ
Setting IP Address
The IP address of mini-pro and camera controlled
should be in the same LAN.
Use 【S】Button to choose 4 segments one-by-one
and then adjust IP address via toggle on the front
panel
Using Toggle and Joystick
The user can use joystick to adjust rotation angle of
the PTZ and toggle to adjust the focal length.
9