Getting Started; Installing A Sim Card - Inseego Wavemaker PRO FG2000e User Manual

Getting Started

This section provides instructions for getting your 5G Indoor Router FG2000e up and running, as well as
reset and support information.

Installing a SIM Card

Your SIM card is a small rectangular plastic card that stores your phone number and important
information about your wireless service. The 5G Indoor Router supports only Nano SIM cards. If the
device SIM is NOT already inserted into this device, select the correct SIM for this device.
CAUTION! Always use a factory-made SIM card supplied by the service provider. Do not bend or scratch
your SIM card. Avoid exposing your SIM card to static electricity, water, or dirt.
To install a SIM card:
1. Remove the cover from the SIM slot on the right side of the device.
2. If necessary, remove the SIM card from the protective sleeve, being careful not to touch the gold
colored contacts.
3. Use the SIM end of the included SIM tool to insert the SIM card into the appropriate SIM slot
notch first, with the gold-colored contact points facing the back of the device.
NOTE: It is best to use SIM slot 1 first.
4. Replace the cover.
NOTE:
Should your SIM card be lost or damaged, contact your network operator.
5G INDOOR ROUTER FG2000e USER GUIDE 9