Inseego Wavemaker PRO FG2000e User Manual page 71

Security Level
You can select from three general security levels to block traffic into and through the FG2000e. The
default Security Level is Medium.
• Low — allows inbound traffic to services with open ports matching the inbound request port.
Outbound traffic is allowed for any service.
• Medium — Rejects inbound traffic. Outbound traffic is allowed for any service.
• High — Rejects inbound traffic. Outbound traffic is allowed only for TELNET (port 23), FTP
(port 21), HTTP (port 21), HTTP (port 80), HTTPS (port 443), SMTP (port 25), DNS (port 53), POP3
(port 110), and IMAP (port 143).
DMZ
DMZ allows the connected device specified as the DMZ IP address (Destination IP address) to receive
all traffic that would otherwise be blocked by the firewall.
NOTE:
Allowing DMZ may assist some troublesome network applications to function properly, but the
DMZ device should have its own firewall to protect itself against malicious traffic.
Allow DMZ: Check this box to allow DMZ.
Destination IP address: Enter the IP address of the connected device you wish to become the DMZ
device (the DMZ destination).
Connected Devices screen.
Click Save changes.
Firewall Rules
You can define one or more specific rules for the firewall to follow. Use the fields to set up a rule, and
click Add new rule. New rules are added to the bottom of the list. Use Up and Down to reposition
rules on the list.
NOTE: For Src. IP and Dest. IP, enter a specific IP address or the keyword any.
Click Save changes.
5G INDOOR ROUTER FG2000e USER GUIDE
NOTE:
You can check the IP address of each connected device on the
71