Primary Network Tab - Inseego Wavemaker PRO FG2000e User Manual

Primary Network Tab

Use these settings to connect initially to the primary Wi-Fi network or change primary network
information. Connected devices must use the Wi-Fi settings shown on this screen.
change these settings, existing connected devices may lose their connection.
NOTE:
When IP Passthrough is turned on, Wi-Fi networking capabilities are set through the connected
host routing system. Settings on this page are not available. Go to Advanced > LAN > IPPT to turn IP
Passthrough off.
Settings
Primary network name (SSID): Enter a primary network name (SSID) to set up or change the primary
network name. The name can be up to 32 characters long.
Security: Select an option for Wi-Fi security:
•
WPA3/WPA2 Transition (default) is the most secure method of Wi-Fi Protected Access and
should be used if possible for WPA2 and WPA3 compliant devices.
• WPA/WPA2 Mixed Mode can be used if some of your older devices do not support WPA2.
•
WPA2 Personal PSK (AES) can be used for WPA2 devices.
•
None allows others to monitor your Wi-Fi traffic and use your data plan to access the Internet.
NOTE:
Avoid using this option.
Password: Enter a Wi-Fi password, or you can use the Generate new password button.
5G INDOOR ROUTER FG2000e USER GUIDE
NOTE: If you
26