Inseego Wavemaker PRO FG2000e User Manual page 69

Signal Strength: The threshold signal strength at which you want the SIM to switch automatically.
When signal strength falls below this threshold for the amount of time specified in Signal Strength
Failover Timer, failover occurs to the other SIM. NOTE:
Higher absolute values for signal strength
indicate a stronger signal, for example: -80 dBm is a stronger signal than -90 dBm.
Signal Strength Failover Timer: Enter the amount of time signal strength must remain below the
threshold set in Signal Strength to trigger an automatic SIM switch.
SIM Failover Enabled: When enabled, SIM failover monitors connection health and switches the SIM
if there is loss of connectivity to the network, based on the SIM Failover Timer.
SIM Failover Timer: Enter the number of seconds of connectivity loss needed to trigger failover.
Allow Device to Connect to the Mobile Network:
Use the ON/OFF slider when necessary to turn off
access to the mobile network. This forces your FG2000e to use Ethernet WAN.
Click Save to Device.
5G INDOOR ROUTER FG2000e USER GUIDE 69