Getting Started - Inseego 5G Home Router 1A User Manual

Getting Started

To set up and use your 5G Home Router 1A for the first time:
1. Confirm that your computer meets the minimum system requirements. (See "System
Requirements" on page 3.)
2. Install the batteries. (See "Installing the Batteries" on page 6.)
3. Plug in the power adapter and power on the unit. (See "Powering On" on page 7.)
4. Connect your computer or other Wi-Fi enabled devices to the router using Wi-Fi. (See
"Connecting Devices Wirelessly" on page 8.)
5. Connect up to three devices via Ethernet. (See "Connecting Devices with Ethernet" on page
10.)
Installing the Batteries
The 5G Home Router 1A comes with three AA batteries that provide backup for voice calls during
power outages.
1
NOTE: Data service is not available when the 5G Home Router 1A is running on backup batteries.
IMPORTANT: Whenever you remove or insert batteries, make sure your 5G Home Router 1A is not
connected to any device or power source. Never use tools, knives, keys, pens or any type of object to
force the battery cover open or to remove the battery. Doing so could puncture the battery.
CAUTION: Risk of explosion if the batteries are replaced by an incorrect type. Dispose of used
batteries according to the instructions on page 55.
1 Voice calls will be available in a future release
5G HOME ROUTER 1A USER GUIDE 6