Inseego Wavemaker PRO FG2000e User Manual page 41

Add New VPN Tunnel: Step 3 out of 5
IKE Phase 1
Key lifetime: The lifetime of the phase 1 key, in seconds.
Select desired items from each column.
option in each column. For example, if Phase 1 on this page is configured to support Hash SHA2 512,
SHA2 384, and SHA2 256, then at least one of those selections must be selected in Phase 2 on the next
page in order to be a common Hash.
Add New VPN Tunnel: Step 4 out of 5
IKE Phase 2
Key lifetime: The lifetime of the phase 2 key, in seconds.
Select desired items from each column.
option in each column. For example, if Phase 1 on the previous page is configured to support Hash
SHA2 512, SHA2 384, and SHA2 256, then at least one of those selections must be selected in Phase 2
on the this page in order to be a common Hash.
Add New VPN Tunnel: Step 5 out of 5
Dead Peer Detection (DPD) is a keep-alive method that ensures the tunnel is up and will take action if
it is not able to reach the remote side of the tunnel, depending on what DPD action you select. You
can use the default values, if desired.
Dead Peer Detection
Enable: Check this box to enable DPD.
DPD action: Use the drop-down to select a DPD action.
DPD delay: The number of seconds between DPD packets.
DPD timeout: The number of seconds the router will allow an IPSec session to be idle before
beginning to send DPD packets to the peer machine.
Click Finish and save to implement your settings. You return to the VPN page. The new VPN tunnel is
now listed.
5G INDOOR ROUTER FG2000e USER GUIDE
NOTE: Each phase should support at least one matching
NOTE:
Each phase should support at least one matching
41