Arm/ Stand Mounting - Avalue Technology ARC-21W38 Quick Reference Manual

3.4.2

Arm/ Stand Mounting

This Panel PC can be mounted on a VESA-compliant arm mount with a 100mm interface
pad. To affix the panel PC to an arm mount, follow the steps below.
1. Refer to the installation instruction of mounting arm/ stand to correctly assembly the
arm/ stand onto the surface as a base.
2. Align the retention screw holes on the mounting arm interface with VESA holes in the
panel PC and secure the panel PC with four M4 retention screws. Ensure that the
thread depth of the screws on the rear panel does not exceed 4mm.
Quick Reference Guide
ARC-21W38 Quick Reference Guide 67