Avalue Technology ARC-21W38 Quick Reference Manual page 19

Quick Reference Guide
Purposes and Applications
ARC-21W38 is used the Intel Atom® X-series (Elkhart Lake platform), which has stronger
performance and lower power consumption. it also inherits from ARC-series strength, Modularized,
Flexible Expansion, Reliability and Stability.
ARC series have been passed stricter vibration and shock testing. It can be used on extreme
environment like manufacture or factory. Typical applications are HMI, Automation, POI, KIOSK.
It also can be suitable for the customer's various application and scenario that need more
ruggedized, vibration and water/dust-proof environment(IP65 Front Panel, IP41 Rear (except I/O)).
Unpacking
Note:
If any of the components listed in the checklist below are missing, do not proceed with the
installation. Contact the Avalue reseller or vendor the product was purchased from or
contact an Avalue sales representative directly by sending an email to
sales@avalue.com.tw.
To unpack the flat bezel panel PC, follow the steps below.
WARNING!
The front side LCD screen has a protective plastic cover stuck to the screen. Only remove
the plastic cover after the fiat bezel panel PC has been properly installed. This ensures the
screen is protected during the installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4: Open the inside box.
Step 5: Lift the panel PC out of the boxes.
Step 6: Remove the peripheral parts box from the main box.
ARC-21W38 Quick Reference Guide 19