Arm/ Stand Mounting 安装臂/支架 - Avalue Technology FPC-1736 Quick Reference Manual

17” flexibility multifunctional touch panel pc

Hide thumbs Also See for FPC-1736:

Table of Contents

FPC-1736

2.6.2 Arm/ Stand Mounting 安装臂/支架

FPC-1736 can be mounted on a VESA-compliant arm mount with a 100mm interface pad.

To affix the panel PC to an arm mount, follow the steps below.

FPC-1736 可以安装在带有 100 毫米接口垫的符合 VESA 标准的臂架上。要将平板计算

器固定到臂架上，请按照以下步骤操作

1. Refer to the installation instruction of mounting arm/ stand to correctly assembly the

arm/ stand onto the surface as a base.

参考安装臂/支架的安装说明，将臂/支架正确组装到表面上作为底座

2. Align the retention screw holes on the mounting arm interface with VESA holes in the

panel PC and secure the panel PC with four M4 retention screws. Ensure that the

thread depth of the screws on the rear panel does not exceed 4mm

将安装臂接口上的固定螺丝孔与平板计算器上的 VESA 孔对齐，并用四颗 M4 固定螺丝

固定平板电脑。确保后面板螺丝的螺纹深度不超过 4mm

38 FPC-1736 Quick Reference Guide FPC-1736 快速使用指南

Table of Contents