ARC-21W38
ACPI Sleep State
5.6.2.7 Super IO Configuration
You can use this item to set up or change the Super IO configuration for serial ports. Please
refer to 5.6.2.7.1 ~ 5.6.2.7.5 for more information.
Item
Serial Port 1 Configuration
Serial Port 2 Configuration
DB Board
Serial Port 3 Configuration
Serial Port 4 Configuration
Serial Port 5 Configuration
90 ARC-21W38 Quick Reference Guide
Suspend Disabled,
S3 (Suspend to RAM)[Default]
Options
Set Parameters of Serial Port 1 (COMA).
Set Parameters of Serial Port 2 (COMB).
DB-A/C/E/J
DB-B
DB-F 1COM
DB-D/H/K 2COM
DB-G 3COM
M/B Mode Test[Default]
Set Parameters of Serial Port 3 (COMC).
Set Parameters of Serial Port 4 (COMD).
Set Parameters of Serial Port 5 (COME).
Select the highest ACPI sleep state the
system will enter when the SUSPEND
button is pressed.
Description
DB Board A-K: DB-A/B/C/E/J w/o UART DB-G w/t
3UART DB-D/H/K w/t 2UART DB-F w/t 1UART.