Avalue Technology ARC-21W38 Quick Reference Manual page 116

ARC-21W38
Basic Troubleshooting
PEI Beep Codes
# of Beeps
1
2
3
4
4
7
DXE Beep Codes
# of Beeps
1
4
5
5
6
7
8
116 ARC-21W38 Quick Reference Guide
Description
Memory not Installed
Recovery started
Typically for development use.
The beep code is generated when DXEIPL PPI or DXE Core is not found.
Recovery failed
S3 Resume failed
Typically for development use.
The beep code is generated when platform cannot be reset because reset
PPI is not available.
Description
Invalid password
Typically for development use.
The beep code is generated when some of the Architectural Protocols are
not available.
No Console Input or Output Devices are found
No Console Input Devices are found
Flash update is failed
Typically for development use.
The beep code is generated when platform cannot be reset because reset
protocol is not available.
Platform PCI resource requirements cannot be met