Wall Mounting - Avalue Technology ARC-21W38 Quick Reference Manual

The panel PC supports various mounting options, as listed below.
◼
Wall mounting (ACC-RITYVESA-B075R, Demonstration only)
◼
Arm/ Stand mounting (ACC-ARM-D41R, Demonstration only)
◼
Panel mounting (Mounting kit in the package)
◼
VESA mounting (Screws in the package)
3.4.1

Wall Mounting

To mount the panel PC onto wall, follow the instruction below (see Figure for addition
reference).
1. Insert four M4 screws into the VESA holes on the panel PC and tighten them to secure
the bracket to the rear panel, ensure that the thread depth of the screws on the rear
panel does not exceed 4mm.
2. Select the location on the wall for the wall mount plate, secure the mount plate to the
wall by inserting four M5 screws into pilot holes and tightening them.
Quick Reference Guide
ARC-21W38 Quick Reference Guide 65