Table of Contents
Advertisement
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
iDRAC Quick Sync 2 indicators
Table 7. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Off (default state)
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly
and then turns off
Solid amber
Blinking amber
Right control panel view
Figure 6. Right control panel
Condition
Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the
iDRAC Quick Sync 2 feature.
Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to turn off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Corrective action
If the LED fails to turn on, reseat the left
control panel flex cable and check. If the problem
persists, see the
Getting help
If the LED fails to turn off, restart the system.
If the problem persists, see the
section.
If the indicator continues to blink indefinitely, see
the
Getting help
section.
If the indicator continues to blink indefinitely, see
the
Getting help
section.
Check if iDRAC Quick Sync 2 feature is
configured to be disabled by iDRAC. If
the problem persists, see the
section.
www.dell.com/poweredgemanuals
OpenManage Server Administrator User's Guide
at https://www.dell.com/openmanagemanuals.
Restart the system. If the problem persists, see
the
Getting help
section.
Restart the system. If the problem persists, see
the
Getting help
section.
Dell EMC PowerEdge R640 overview
section.
Getting help
Getting help
or Dell
15
Advertisement
Table of Contents
