Table of Contents
Advertisement
Table 5. Status LED indicators and descriptions (continued)
Icon
Description Condition
Electrical
The indicator turns solid amber
indicator
if the system experiences an
electrical error (for example,
voltage out of range, or a failed
power supply unit (PSU) or
voltage regulator).
Memory
The indicator turns solid amber if
indicator
a memory error occurs.
PCIe
The indicator turns solid amber
indicator
if a PCIe card experiences an
error.
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
System health and system ID indicators
Table 6. System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
14
Dell EMC PowerEdge R640 overview
Corrective action
● External airflow is obstructed.
If the problem persists, see
Check the System Event Log or system messages for the specific
issue. If it is due to a problem with the PSU, check the LED on the
PSU. Reseat the PSU.
If the problem persists, see
Check the System Event Log or system messages for the location of
the failed memory. Reseat the memory module.
If the problem persists, see
Restart the system. Update any required drivers for the PCIe card.
Reinstall the card.
If the problem persists, see
Condition
Indicates that the system is turned on, system is healthy, and
system ID mode is not active. Press the system health and
system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem
persists, see the
Getting help
Indicates that the system is experiencing a fault. Check the
System Event Log or the LCD panel, if available on the bezel,
for specific error messages. For information about the event and
error messages generated by the system firmware and agents
that monitor system components, go to
Error Code, type the error code, and then click Look it up..
Getting
help.
Getting
help.
Getting
help.
Getting
help.
section.
qrl.dell.com
> Look Up >
Advertisement
Table of Contents
