Table of Contents
Advertisement
Table 8. Right control panel
Item
1
2
3
4
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC
subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet.
The following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 9. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Solid green for two
seconds
Flashing green (on for
two seconds and off for
two seconds)
Turns off
16
Dell EMC PowerEdge R640 overview
Indicator or button
Power button
USB port
iDRAC Direct LED
iDRAC Direct port (Micro-AB
USB)
Condition
Indicates that the laptop or tablet is connected.
Indicates that the laptop or tablet connected is recognized.
Indicates that the laptop or tablet is unplugged.
Icon
N/A
Description
Indicates if the system is
powered on or off. Press
the power button to manually
power on or off the system.
NOTE:
Press the power
button to gracefully shut
down an ACPI-compliant
operating system.
The USB ports are 4-pin, 2.0-
compliant. This port enables
you to connect USB devices
to the system.
The iDRAC Direct LED
indicator lights up to indicate
that the iDRAC Direct port
is actively connected to a
device. For more information,
see the
iDRAC Quick Sync 2
indicator codes
on page 15
section.
The iDRAC Direct (Micro-
AB USB) port enables
you to access the iDRAC
Direct (Micro-AB) features.
For more information, see
the Integrated Dell Remote
Access Controller User's
Guide at
www.dell.com/
poweredgemanuals.
Advertisement
Table of Contents
