Table of Contents
Advertisement
Figure 93. Cable routing - 4 x 3.5 drive backplane with adapter PERC
1. Drive backplane
3. System board
5. Backplane signal cable(BP: J_BP_SIG to MB: J_BP_SIG1)
7. SAS cable(BP: J_SAS_A to PERC: A1)
Figure 94. Cable routing - 4 x 3.5 drive backplane and 2 x 2.5 rear drive backplane with NVMe
1. Drive backplane
3. System board
106
Installing and removing system components
2. Cable routing clip
4. Backplane power cable(BP: J_BP_SIG to MB: J_BP_SIG1)
6. Adapter PERC card (PERC11)
8. Cable routing clip
2. Cable routing clip
4. Backplane power cable(BP: J_BP_SIG to MB: J_BP_SIG1)
Advertisement
Table of Contents
