Accessing The Set Parameters Menu; Selecting Measurements, Test Start Mode, Or Test Points - Midtronics Celltron Advanced CTA-2000 Instruction Manual

Accessing the SET PARAMETERS menu

To access the
SET PARAMETERS
1. Press and hold
Screen display:
MIDTRONICS
CELLTRON ADVANCED
© 2003 MIDTRONICS
1. SET PARAMETERS
2. TEST BATTERY
3. VIEW PARAMETERS
If menus other than the main
Note:
option and press
MAIN MENU
2. Press or
Screen display:
SELECT STRING
01. STRING 01
02. STRING 02
03. STRING 03
3. Select a memory location (string name) for the string you are testing.
Screen display:
01. STRING 01
PARAMETERS
1. CONDUCTANCE & V
2. AUTO START

Selecting measurements, test start mode, or test points

The options
VOLTS ONLY
or
ONLY JARS AND STRAPS
list, press to display the option.
ENTER
For example:
To display
VOLTS ONLY
to select
ENTER VOLTS ONLY
menu:
on the analyzer.
MENU
MENU
ENTER
to scroll to
SET PARAMETERS
or
CONDUCTANCE & V, AUTO START or MANUAL START, and JARS
are toggles. If the value you want is not displayed in the parameters
in the parameters list when
.
is displayed, press
MENU
.
.
CONDUCTANCE & V
18
or to scroll to the
is displayed, press