Parts On The Panels; Menu Options; Menus; Main Menu - Midtronics Celltron Advanced CTA-2000 Instruction Manual

Parts on the panels

Table 6 describes the parts of the panels.
Table 6. Parts of the panels
Part
Screen
UP
DOWN
ENTER
RETEST
MENU
Battery door
Infrared light
Screw holes
Cable port
Fuse holder

Menu options

Menus

The analyzer displays menus on the screen that you can select options from before, during, and
after testing. You can access options from the main

Main MENU

To access the main
MENU
The main
MENU
1. SET PARAMETERS
2. TEST BATTERY
3. VIEW PARAMETERS
4. PRINT RESULTS
5. VIEW RESULTS
6. EXPORT DATA
7. CHANGE REF.
8. UTILITIES
The
Note: MAIN MENU
main .
MENU

String names

The string names are 16 memory locations that are listed after you select an option on the main
. These locations store the information you enter about strings so you do not have to
MENU
reenter data each time you test a string. You select the string name you want to create, add, or
change information about. The default names are "
you can change these names to the names of the strings you are testing. For information about
changing the string names, refer to "Setting options in the
Displays menus, options, and test results.
Allows you to scroll up in a menu or number selections.
Allows you to scroll down in a menu or number selections.
Moves to the option you select or enters number selections.
Opens a menu with options to retest the jar or strap you just tested.
Turns the analyzer on and off.
Houses the battery for the analyzer.
Transfers data from the analyzer to the printer and PC.
Allow screws to anchor the cable to the analyzer.
Connects clamps or probes to the analyzer for testing.
Houses the fuse for the analyzer.
, press and hold
MENU
displays these options:
option is available on some menu screens to allow you to return to the
Description
.
MENU
on the analyzer.
" through "
01. STRING 01
menu" in Chapter 2.
UTILITIES
5
," but
16. STRING 16