Intent Of Use - Stanley 07535 Instruction And Service Manual

Fixed arm workstation for speed rivets fixed arm workstation for speed rivets

Hide thumbs Also See for 07535:

Table of Contents

Available languages

O R I G I N A L I N S T R U C T I O N

3. INTENT OF USE

The pneumatic 07535 MkII type tool is designed to place STANLEY Engineered Fastening speed fasteners (except 1/16"

Avlug®) making it ideal for batch or flow-line assembly in a wide variety of applications throughout all industries.

The base tool part number for the 07535 MkII model is 07530-02200. See the general assemblies on pages 19 and 20.

The 07535 MkII will place the same fasteners and both will place most repetition fasteners, as shown in the table below.

The 07535 MkII makes use of the same nose equipment. Reference must be made to the Accessories manual (07900-09508)

when selecting compatible components for the type and size of fastener used in your application.

DO NOT use under wet conditions or in the presence of flammable liquids or gases.

FASTENER SIZE

E N G L I S H

Table of Contents