Connecting The System Unit Power Cord; Connecting The Power Cord - Digital Equipment DECsystem 5100 Installation Manual

2.5 Connecting the System Unit Power Cord
Note Make sure that the on/off switch on the back of the system unit is in the off (0)
position.
The system accepts power inputs in the ranges 100/120 Vac and 200/240 Vac
at 50 or 60 Hertz. Within these limits the power supply is self-sensing and no
selection or switching is required.
Connect the supplied power cord to the power socket on the back of the system
unit. See Figure 2-5. Connect the other end of the power cord to a grounded
power outlet.
Figure
2-5
Connecting the Power Cord
System Power Cord - - - = - - - - - - - - - -
RE_EN05155A_90
Installing Your DECsystem 5100 2-7