Dip Switch Setting In Video Lan Converter - Furuno VR-7000 Installation Manual

3.3

DIP Switch Setting in Video LAN Converter

Set the DIP switch (S1) in the cases shown below.
• When two video LAN converters are installed:
Turn on the S1-1 in the No.2 video LAN converter (No.2 VLC).
• When the RGB1 or RGB2 port is used:
Turn on the S1-3 (RGB1) or S1-4 (RGB2) when you input the video signal of the
FAR-287 series radar (resolution: 13601024) to the RGB port.
The location and setting of the DIP switch are shown below.
Inside view of the video LAN converter
Dip SW S1-1
ON No.2 VLC
OFF No.1 VLC
(Default
setting)
S1-2
Used for For inputting the
maintenance. video signal of the
FAR-287 series
radar (resolution:
13601024) to the
RGB1 port.
Normal oper- For inputting the
ation. video signal of the
FAR-217 series
radar or other mod-
el to the RGB1 port.
3. SETTING UP THE EQUIPMENT
DIP switch S1
1
ON
OFF
S1-3 S1-4
For inputting the
video signal of the
FAR-287 series
radar (resolution:
13601024) to the
RGB2 port.
For inputting the
video signal of the
FAR-217 series
radar or other mod-
el to the RGB2 port.
8
S1-5 to S1-8
No use.
Normal oper-
ation.
3-3