Table of Contents
Advertisement
15. MOVING POSITION OF THE SYSTEM
Position of the system for
safe transportation
RELOCATING THE STAND
1. Turn off the unit at the power switch.
2. Disconnect the power cable.
3. Remove the video cable from the video modules (e.g., video monitor, USB monitor) and the camera
control unit.
4. Release locks by pressing the upper parts of the locks downwards.
5. Bring the unit into its moving position.
6. Be careful of heights when passing through doorways.
7. Avoid collision of any kind.
8. Do not go over steps and edges: the stand ,might topple!
9. Be extremely careful when moving over slopes.
10. Do not park the stand on slopes
11. Press lock downwards.
12. Check whether the stand is locked in position.
6165000-795
Fold the system
as shown
before moving
Fig. 21
Prima GN
PRIMA GN
18
Issue 1.9
Printed on May,2023
Advertisement
Table of Contents
