SPX FLOW Bolting Systems PE60 Series Operating Instruction page 11

LCD Functions Continued
B. CLEAR DISPLAY
i� ZERO DISPLAY
• Use the "▲▼" buttons to select "ZERO
DISPLAY" mode, then press the "ENTER"
button (Refer to screen 19)�
• Display will return to the "OUTPUT
SCREEN"�
C. LCD BACKLIGHT
1� LOW
2� MEDIUM
3� HIGH
4� EXIT
• Use the "▲▼" buttons to adjust the
screen's brightness from low to high as
needed, then press the "ENTER" button
(Refer to screen 20)�
D. LCD HEATER
1� LOW
2� MEDIUM
3� HIGH
4� EXIT
• Use the "▲▼" buttons to select desired
temperature, then press the "ENTER"
button (Refer to screen 21)�
© SPX FLOW, Inc.
CLEAR DISPLAY
1. ZERO DISPLAY
ENTER
LCD BACKLIGHT
1. LOW
2. MEDIUM
3. HIGH
4. EXIT
ENTER
LCD HEATER
1. LOW
2. MEDIUM
3. HIGH
4. EXIT
ENTER
10
spxflow.com
Screen 19
spxflow.com
Screen 20
spxflow.com
Screen 21
Form No. 1001338
Rev. 0 Sep. 6, 2023