Table of Contents
Advertisement
Chapter 10 TRANSPORTATION
Lifting Engine
Front hanger
Rear hanger
To lift the engine, use wire ropes, shackles and slings
capable of supporting the weight of the engine.
Hitch slings to the hangers provided on the engine to
lift the engine.
Consider the engine's center of gravity and maintain
the balance during lifting.
The hangers attached to the engine are designed for
lifting the engine only. When lifting the engine
equipped with a marine gear, etc., take care so that
Fig. 10-1 Lifting Hangers
the load is not imposed only on the hangers of the
engine.
Keep sling angles within 60 degrees. If the angle
60°
exceeds this limit, excessive load will be imposed on
or less
the hangers and this could damage the hangers and
result in a serious accident.
Hitch wire ropes to the hangers after removing the
pipe cover near the hanger. To prevent damage to
the engine and wire ropes, use a cloth or other soft
padding so that the wire ropes will not come in con-
Fig. 10-2 Hiching Wire Ropes
tact with the engine.
10-1
Advertisement
Table of Contents
Troubleshooting
