Instrument Panel; Fig. 2-14 Instrument Panel; Table 2-1 Instrument Panel - Mitsubishi S12R-T2MPTK Operation & Maintenance Manual

Table of Contents

Advertisement

Instrument Panel

1
kg/cm
No.
Name
Manifold pressure
1
gauge
Coolant tempera-
2
ture gauge
Lubricating oil
3
pressure gauge
Engine speed
4
tachometer
Hour meter
5
(Accumulated
operation time)
Time display and
6
adjustment buttons
7
Fuse
8
Light check switch
2
2
6
13

Fig. 2-14 Instrument Panel

Table 2-1 Instrument Panel

Indicates manifold air pressure in the engine.
Indicates the temperature of the engine coolant (freshwater).
(Sandard temperature at rated speed: 70 to 80°C [158 to 176°F])
If the gauge indicates 95°C [203°F] or above, the engine is overheating.
Indicates engine oil pressure.
(Standard pressure at rated speed: 0.44 to 0.59 MPa
2
{4.5 to 6.0 kgf/cm
} [63.8 to 85.6 psi])
Indicates the rotational speed of engine (RPM).
Indicates the operating time of engine. Maintenance can be scheduled by reading
this meter. If the starter switch is in "ON" position, time is added to the meter even if
the engine is not running. Be sure to turn the starter switch to "OFF" position when
the engine is stopped.
Always displays the clock time since it is battery-powered type. (Battery: alkaline
button cell battery LR44)
Set the clock time using adjustment buttons.
"Hour" button: One press advances one hour, continuous press to advance faster.
"Minutes" button: One press advances one minute, and continuous press to advance
faster.
"Second" button: To set clock time (minutes) accurately, use this button.
When pressing buttons, use a coin or something smooth. Do not use anything with a
sharp edge like a screwdriver.
There is barrel type 3A fuse inside the cap. If warning lamp does not glow when the
starter switch is turned to "ON", the fuse may have blown. Check the fuse, and if it
has blown, replace it.
When the starter switch is in "ON" position, turn this switch to make sure the warming
lights will glow. Check this during start-up inspection.
3
4
2
kg/cm
X100RPM
7
8
9
10
Function
Chapter 2 NAME OF PARTS
5
OFF
HEAT
ON
START
STARTER SWI T CH
11
12
2-7

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents