Time Program Parameters - Shimadzu GC-2010 Plus Instruction Manual

16 Special Functions
16.3 Time Program
16.3.5

Time Program parameters

Relay
1
Range
Polarity
Current
Detector Zero Adj
Flame
FTD
Detector controller
Splitter Ctrl
Flow controller On/Off
Flow
controller
High press inj mode
Gas saver
DET1, DET2, AUX3, AUX4,
Temperature
AUX5
N U M B E R
Stop OF TIMES
OF RUN
Other
1: "Relay" description
Relay
GC-2010 Plus
232
Parameter
End of
program
0: FILE
0−9 Load
Switch point
Relay
On/Off point
Oven Exhaust Fan
Cooling Fan
AC On/Off
CRG INJ
CRG Colum
Sets range or attenuation for the detector configured in the
analytical line.
Changes the polarity between "+" and "-" for TCD configured in
the analytical line.
Sets current for the detector configured in the analytical line.
Turns on/off zero adjustment for the detector configured in the
analytical line.
Ignites / Extinguishes the flame.
Turns on/off voltage feedback to make current constant for FTD
configured in the analytical line.
Turns on/off control of detector configured in the analytical line
during analysis program.
Opens/closes splitter.
Turn carrier gas, septum purge, detector gas and APC on/off.
Turns high pressure injection mode on/off.
Turns gas saver function on/off.
Use a time program to change temperature of heated zones,
which cannot be programmed.
Specify the number of times to execute the GC program. Then,
either the program stops or the next file is executed. If greater
than 2, the choices are "continuous" or "pause at each run." For
an AOC, select "pause at each run" When "continuous". is
selected, the program executes continuously at set intervals.
If another program (such as a temperature program) is running
when time program execution time expires, priority is given to
running the program. When the current program finishes, the
time program stops or file is changed to another file.
Set the parameter to input event No..(Refer to
Event 91,92
PRG
Event 1−16
On or Off
On or Off
On or Off
On or Off
Description
"17.4 Event
V91−92 Point A or B
V93−94 Point A or B
On or Off
2
No.".)