Nat Firewall Connection - Paradyne CPX-1000 Installation Manual

2. Windows Environment
NAT Firewall
Connection
2-24
Note
If you plan to set up the NAT firewall connection, follow
the procedure in Customizing Gatekeeper in JetVision
Server on page 2-25.
A Network Address Translator (NAT) firewall, working closely
with a router, examines each request to determine whether to
forward it toward its destination (JetVision Client). A firewall also
works with a proxy server (JetVision Server) that makes network
requests on behalf of workstation users.
This section provides instructions on how to establish a JetVision
Client connection through the NAT firewall via JetVision Server.
The required tasks include:
Customizing the gatekeeper.properties file on JetVision
Server (page 2-25)
Customizing JetVision Client to access Gatekeeper
(page 2-26)
Note
Use forward slashes (/) even on Windows.
1010-A2-GN21-00
February 2003