Paradyne CPX-1000 Installation Manual page 25

1010-A2-GN21-00
Step 1
Step 2
February 2003
To install JetVision Client on Windows, follow these steps:
Log on with administrator privileges to the computer where you
want to install JetVision Client.
Insert the JetVision Client installation CD-ROM into the CD-ROM
drive. The Welcome screen appears
If your autorun feature is disabled, go to Explore and click
the CD-ROM drive to display the contents. Double-click the
setup.bat file.
If the contents of the JetVision Client installation CD-ROM
have been copied to a network, log on to the network, locate
the setup.bat file and double-click it.
Figure 2–13. Welcome Screen
2. Windows Environment
(Figure 2–13).
2-11