Customizing Gatekeeper In Jetvision Server - Paradyne CPX-1000 Installation Manual

1010-A2-GN21-00
Customizing
Gatekeeper in
JetVision Server
Step 1
Step 2
Step 3
exterior_address=10.0.84.5
exterior_proxy_address=172.16.1.2
exterior_port=15000
enable_callbacks=true
ior_file_name=c: /jetstream/emsserver_2.5/iors/gatekeeper.ior
exterior_callback_port=15001
log_level=normal
February 2003
To customize the gatekeeper.properties file, follow these
steps:
Locate the gatekeeper.properties file. For example,
c: /Jetstream/emsserver_2.5/iors/
gatekeeper.ior
Add the following lines to the beginning of the file
exterior_address
This is the source address that's behind NAT; it's the
JetVision Server IP address. In
10.0.84.5 is used.
exterior_proxy_address
This is the address used outside NAT, which is an unused
gateway address. In
Modify the following lines.
exterior_port
This identifies the port number on which JetVision Server
communicates to the outside. In
(default) is used.
exterior_callback
This identifies the port number on which JetVision Server
receives information from the outside. In
15001 (default) is used.
ior_file_name
This identifies the path to the JetVision installation folder. In
Figure 2–31, c: /Jetstream/emsserver_2.5/iors/
gatekeeper.ior is used.
Figure 2–31. Sample Gatekeeper.properties File
2. Windows Environment
Figure 2–31, the address
Figure 2–31, 172.16.1.2 is used.
Figure 2–31, 15000
Figure
(Figure 2–31):
2–31,
2-25