Installing Jetvision Server - Paradyne CPX-1000 Installation Manual

1010-A2-GN21-00
Step 4
Step 5
Installing
JetVision Server
Step 1
Step 2
February 2003
Type a number that corresponds to the application you are
installing, then press <Enter>. The window displays your
workstation capacity and informs you of meeting the installation
requirement.
Type q , then press <Enter> to quit. Or press any key to return to
the menu selection window to continue with system check for
other application you are installing.
Note
This installation procedure assumes that no Oracle is
installed on your computer.
To install JetVision Server on Windows, follow these steps:
Log on with administrator privileges to the computer where you
want to install JetVision Server.
Insert the JetVision Client installation CD-ROM into the CD-ROM
drive. The Welcome screen appears
If your autorun feature is disabled, go to Explore and click
the CD-ROM drive to display the contents. Double-click the
setup.bat file.
If the contents of the JetVision Client installation CD-ROM
have been copied to a network, log on to the network, locate
the setup.bat file and double-click it.
Figure 2–3. Welcome Screen
2. Windows Environment
(Figure 2–3).
2-3