Windows Environment; New Installation - Paradyne CPX-1000 Installation Manual

New
Installation
February 2003
C

Windows Environment

This chapter provides instructions for installing, upgrading, and
removing JetVision Server and JetVision Client on a Windows
operating system. This chapter includes the following topics:
Performing a pre-installation check (page 2-2)
Installing JetVision Server Release 2.5 (page 2-3)
Installing JetVision Client Release 2.5 (page 2-10)
Upgrading JetVision Server (page 2-16)
NAT firewall connection (page 2-24)
Removing JetVision components (page 2-29)
Removing Oracle 8.1.6 (page 2-32)
Before you begin installing JetVision Server and JetVision Client,
ensure that your computer meets all hardware requirements for
the Windows operating system
Requirements).
The installation tasks include:
Installing JetVision Server (page 2-3)
Installing JetVision Client (page 2-10)
If you plan to install JetVision Server and JetVision Client on the
same workstation, make sure to install JetVision Server first.
JetVision Client and JetVision Server use JRE 1.3.1 for installation.
Only one JetVision Server is supported per installation.
H A P T
(Chapter 1, Installation
2
E R
2-1