YASKAWA 1000 Series Installation Manual page 55

Ac drive lcd operator

Hide thumbs Also See for 1000 Series:

LCD Operator

oPr

Oper Disconnect

Cause

Option is not properly connected to the unit.

<1> Display will vary depending on operation status.

YASKAWA ELECTRIC TOBP C730600 29G 1000-Series Option JVOP-180 Installation Manual

LED Operator

(V1000)

LCD Operator Option Connection Fault

Data should appear on the LED operator. By reconnecting the

option to the unit, data should also appear on option display.

An oPr fault will occur when both of the following conditions are

oPr

true:

Output is interrupted when the option is disconnected (o2-06 = 1).

The Run command is assigned to the option (b1-02/b1-16 = 0 and

LOCAL is selected).

• Check the connection between the option and the unit.

• Replace the cable if damaged.

• Turn off the unit input power and disconnect the option.

Reconnect the option and reapply unit input power.

8 Option Fault Diagnostics

Description

Possible Solution

Jvop-180