YASKAWA 1000 Series Installation Manual page 14

4 Option Components
No. Key
4 R R U U N
5
6
7
ST T O O TOP TO
8
9
10
11
LO
RE
14
Name
RUN Key Starts the unit and motor.
Scrolls up to display the next item, selects parameter numbers and
Up Arrow Key
increments setting values.
Down Arrow Scrolls down to display the previous item, selects parameter numbers and
Key decrements setting values.
Stops unit operation.
STOP Key
Note: The STOP key can be enabled or disabled when operating from the
external terminal or network communications by setting parameter o2-02.
• Enters parameter values and settings.
ENTER Key
• Selects a menu item to move between displays.
Switches unit control between the operator (LOCAL) and an external
source (REMOTE) for the Run command and frequency reference.
LO/RE
Note: The LOCAL/REMOTE key is only effective when the unit is
Selection Key
stopped in Drive Mode. As a safety precaution, it is possible to disable the
LO/RE Selection Key by setting parameter o2-01 (LOCAL/REMOTE
Key Function Selection) to 0 (disabled).
Illuminated during an operation.
RUN Light
Refer to Option LED Status Indicators on page 15
LO/RE Light Illuminated while the option is selected to run the unit (LOCAL mode).
YASKAWA ELECTRIC TOBP C730600 29G 1000-Series Option JVOP-180 Installation Manual
Function
for details.