YASKAWA 1000 Series Installation Manual page 19

No. Name
Drive:
Frequency
Reference
Assignment
<2>
Converter:
6
Voltage Reference
Assignment
<2>
Regenerative Unit:
Run Command
Assignment
<2>
LO/RE
7
Display
<3>
YASKAWA ELECTRIC TOBP C730600 29G 1000-Series Option JVOP-180 Installation Manual
Display
OPR Displayed when the frequency reference is assigned to the option.
Displayed when the frequency reference is assigned to the Analog Input of
AI
the drive.
Displayed when the frequency reference is assigned to the MEMOBUS/
COM
Modbus Communication Inputs of the drive.
Displayed when the frequency reference is assigned to an Option Unit of the
OP
drive.
Displayed when the frequency reference is assigned to the Pulse Train Input
RP
of the drive.
OPR Displayed when the voltage reference is assigned to the option.
Displayed when the voltage reference is assigned to the Analog Input of the
AI
converter.
Displayed when the voltage reference is assigned to the MEMOBUS/
COM
Modbus Communication Inputs of the converter.
Displayed when the voltage reference is assigned to an Option Unit of the
OP
converter.
Displayed when b1-18 is set to either 7 or 8 (input voltage based control 1 or
AUTO
2).
OPR Displayed when the Run command is assigned to the option.
Displayed when the Run command is assigned to the Analog Input of the
AI
regenerative unit.
Displayed when the Run command is assigned to the MEMOBUS/Modbus
COM
Communication Inputs of the regenerative unit.
Displayed when the Run command is assigned to an Option Unit connected
OP
to the regenerative unit.
RSEQ Displayed when the Run command is supplied from a remote source.
LSEQ Displayed when the Run command is supplied from the digital operator.
Drive: Displayed when the frequency reference is supplied from a remote
source.
Converter: Displayed when the voltage reference is supplied from a remote
RREF
source.
Regenerative unit: Displayed when the Run command is supplied from a
remote source.
Drive: Displayed when the frequency reference is supplied from the digital
operator.
Converter: Displayed when the voltage reference is supplied from the digital
LREF
operator.
Regenerative unit: Displayed when the Run command is supplied from the
digital operator.
4 Option Components
Content
19