YASKAWA 1000 Series Installation Manual page 42

6 Basic Operation
Read/Copy Function Procedure
• Read
Reads and saves parameter settings from the converter to the option.
Note: The option can perform the Read function an estimated 100,000 times.
• Copy
Copies parameter settings from the option to another Yaskawa converter.
These parameters control the Copy function of the digital operator. The Copy function
stores parameter settings into the memory of the digital operator to facilitate the transfer
of those settings to other converters that are the same model, capacity, and same control
mode setting.
Note: Parameter settings can only be copied to other converters that are the same model, capacity, and
have the same control mode setting.
• Verify
Verifies that parameter settings in the converter match the parameter settings saved to the
option.
The following procedure is used to read parameters from the converter.
Note: Set parameter o3-02 (Read Allowable) to 1 (Enable) to read the parameter settings from the
converter.
Set parameter o3-02 to 0 (Disable) to protect the parameter settings in the option.
1. DC Bus Voltage Reference display.
2. Press
3. Press to show the Initialization display.
42
Procedure
to select the Programming Mode.
YASKAWA ELECTRIC TOBP C730600 29G 1000-Series Option JVOP-180 Installation Manual
LCD Display
- MODE - DRV Rdy
Volt Ref
U1-51= 0330V
U1-52= 295V
LSEQ
U1-53= 0.0A
LREF
-MODE- PRG
Programming
HELP
DATA
-PRMSET- PRG
Initialization
A1-00= 0
Select Language
← →